Tag Archives: addons for raiding

Vuhdo HoT Display for Holy Paladins

This is the first time I’ve ever set out to write something instructional here. If you aren’t a Holy paladin, and you aren’t interested in using Vuhdo, you probably won’t be very interested in this. Or perhaps you’re curious. Well, Vuhdo is an addon for healing much like Healbot or Grid. It’s my addon of choice as a resto druid because I love its user friendly configuration and HoT display options. Until today though, I realized that as a holy paladin I wasn’t using it to its fullest potential.

A paladin doesn’t need quite as many HoTs set up as a resto druid does, though. We’re primarily interested in our Sacred Shield, Beacon of Light, and Flash of Light HoTs for tracking. Vuhdo has a built-in option for this in the “Buffs” menu. It lets you know when Beacon of Light or Sacred Shield drop off a specified target. This has worked fine for me up until now, for 5-mans; when I realized that “when it drops off” just wasn’t cutting it. I needed to know when it was going to drop off so I could pre-empt it, and also be able to switch targets mid-fight. I set out to configure Vuhdo to show me. It’s actually quite easy to do once you know where to go.

First off, here is the Vuhdo menu that seems most intuitive for tracking Beacon and SS.

"Buffs" panel, with Config selected.

If you look at it, you can set up a colour for each buff. I go with orange for Beacon, yellow for SS. To the right, you can see how that looks on an actual health bar. The problem with this, as I mentioned above, is that the bars will only light up once the buff has dropped off. Not always such a good thing. It also can’t switch targets mid-fight – so while you may have dropped your beacon on another target because of fight mechanics, this bar will show orange to say “Hey, player X doesn’t have Beacon!” But by default, Vuhdo won’t show you who DOES have Beacon. Because of this, after configuring my HoTs I’ve actually turned it off so that it won’t try to tell me to put Beacon on someone who shouldn’t have it. It makes the tank swapping fights easier to do. But first you need to have this info displaying, and that’s where the next menu comes in.

Vuhdo's configuration menu, at the "Panels" tab.

Instead of going into the Buffs menu, along the bottom tabs, click on “Panels.” Then along the right hand-side, look for “HoT Icons.” This is the menu you will see. Make sure that “Own Hots” is checked off at the upper left hand corner there. Below that, you see what looks like a bewildering jumble of circles, but it’s actually pretty easy to understand when you start to mess around with them. In this example you can see that I have the far left red indicator checked off. At the bottom of the screen, you can see how the HoTs I have selected will display with that option. It puts them off the health bar, in a space to the left. That could work for you if you like that – I don’t prefer it, because it means my eyes have to move away from the health bar itself.

In the center of the menu, you can see the “HoT Order” box there. Each arrow points to a place where you can select the HoT you’d like displayed; from in-most to outer. (In my example above, the orange square is Beacon of Light, Yellow is Sacred Shield, and teal is the FoL HoT. I ordered them that way because I always want Beacon¬† (often on a solitary target) on the left. When you click the drop-down menu, this is what you’ll see:

You must choose, but choose wisely.

Yes, you can have it display your Gift of the Naaru if you’re a draenei like me (and why wouldn’t you be?!) You can also have it show the Sacred Shield, FoL, and Beacon of other paladins by selecting¬† the “Others” check boxes to the right. I didn’t bother with this because I was the only paladin in our raid tonight, which is pretty rare. Still, it’s potentially useful to avoid overwriting the shields and beacons of others. In this image you can see I have selected a location for my HoTs different from the first one. I want them inside the health bar, and in the upper half so that they don’t obscure the bar entirely. I’ve also opted to line them up along the left; that way when health is dropping I can see it easily without any boxes in the way, but this is a personal choice, and you’ll see it in action a bit later. Next, you’re going to set up your own colours, in case you hate teal.

Pretty colours.

Along the bottom tabs, click “Colors” right next to “Panels” and then go to “HoTs” along the right hand side. This is what you’ll see, more or less, except I’ve already set up my colours. To change the colour of a HoT, just click on the coloured bar along the left and you’ll get a colour selection menu. Here you can see the colours I’ve defined. The options along the right deal with the text of the icons themselves, and how they act as they tick down. Here the default options are shown, I haven’t changed any of this. You can opt to select “Full Duration” next to any HoT to show it ticking down the entire time it’s running, which could be handy if you need to know as much as possible. I might try this out for Beacon so I’ll always know approximately when the refresh is coming, but it might be information overload.

In raid.

Here’s what the above configuration looks like in an actual raid. You can see the orange button indicating that Vinius is my Beacon of Light target, and Beacon of Light is active on him at this time. Immediately below him is Wallofbricks, the main-tank. He has Sacred Shield on him, and you can see that my Flash of Light HoT is ticking down – it has only 6 seconds remaining. As it ticks the box will fade and then disappear entirely, unless I refresh it first. By default, the Beacon and SS indicators will also begin to show similar timers that can be configured, but that’s getting into more “Vuhdo” things and less “Vuhdo paladin” things.

I suppose it’s generally a “duh” but these simple configurations definitely helped with my healing tonight. I didn’t have any downtime on Beacon or SS, was better able to ensure my tank had the FoL heal, and I am a doofus for not doing this sooner. I know there are great addons for tracking these things, but where possible I like to work with the addons I’m already using and clearly Vuhdo knew how to do it, even if I hadn’t yet done it myself. So don’t be like me if you use Vuhdo, configure these things properly, you’ll be grateful later!

Hopefully that was easy to understand, if you have any questions I’ll be happy to answer them in comments if I know the answer, no guarantees!

Advertisements